Installation - Dragon 13

  1. Insert the DVD for Dragon NaturallySpeaking.
  2. Use Windows Explorer to find and double-click setup.exe on the DVD.

    3. The following dialogue box will appear.

  3. Click Next when the button appears.
  4. Select Custom from the Setup Type menu.
  5. Click Next.

    6. No changes are required on the following screen.

  6. Click Next.
  7. Select Modify the administrative settings.
  8. Select Modify the application’s settings for all users.
  9. Click Next.

  10. Follow the on-screen prompts to complete the installation.

Note:

It is possible to upgrade profiles created in earlier versions of Dragon to be used in Dragon 13. The Acoustic and Language Model Optimizer should be run in the current Dragon version before upgrading to Dragon 13. See Upgrade a profile from a previous Dragon version

Note:

You will need a licence key to install Dragon 13. Contact Wellbeing Service if you do not have one.

Tip:

If the installation does not start automatically, use Windows Explorer to find and double-click setup.exe on the DVD or in your Downloads folder.

Tip:

Dragon software can be configured per individual user profile using the Typical installation. However, Wellbeing Software strongly recommend that the Custom installation is used as standard since this allows the Trust to configure required default settings for all users at once.

Next steps

    When installing Dragon for the first time it will be necessary to create a local 'Setup' user to test that the options and roaming profiles are correctly configured ahead of adding subsequent users.

Note:

You can also access Options via (right-click) Dragon menu > Tools > Options. Options set in this way will only apply to the open user profile.

Tip:

Before configuring roaming profiles, ensure that the shared volume where they will be stored is correct.

  1. Insert the DVD for Dragon NaturallySpeaking.
  2. Use Windows Explorer to find and double-click setup.exe on the DVD.

    3. The following dialogue box will appear.

  3. Click Next.
  4. Select Modify from the Setup Type menu.
  5. Click Next.

    6. No changes are required on the following screen.

  6. Click Next.

  7. Select Modify the administrative settings.
  8. Select Modify the application’s settings for all users.
  9. Click Next.

  10. Follow the on-screen prompts to complete the installation.

Note:

It is possible to upgrade profiles created in earlier versions of Dragon to be used in Dragon 13. The Acoustic and Language Model Optimizer should be run in the current Dragon version before upgrading to Dragon 13. See Upgrade a profile from a previous Dragon version

Tip:

Dragon software can be configured per individual user profile using the Typical installation. However, Wellbeing Software strongly recommend that the Custom installation is used as standard since this allows the Trust to configure required default settings for all users at once.

Next steps

Note:

You can also access Options via (right-click) Dragon menu > Tools > Options. Options set in this way will only apply to the open user profile.

Tip:

Before configuring roaming profiles, ensure that the shared volume where they will be stored is correct.

  1. Right-click Dragon menu > Profile > Close User Profile.

  2. Right-click Dragon menu > Help > Check for Update.
  3. Select the Service Pack tickbox.
  4. Click Install.
  5. Once downloaded, click Next
  6. Click Update.
  7. Click Yes.

Note:

The update can also be downloaded and installed later if required.

  1. Insert the DVD for Dragon NaturallySpeaking.
  2. Use Windows Explorer to find and double-click setup.exe on the DVD.

  3. Select Remove all existing versions and continue the installation.

  4. Click Next.

  5. Select Custom from the Setup Type menu.
  6. Click Next.

    7. No changes are required on the below screen.

  7. Click Next.

  8. Select Modify the administrative settings.
  9. Select Modify the application’s settings for all users.
  10. Click Next.

  11. Follow the on-screen prompts to complete the installation.

Warning:

When upgrading from a previous version of Dragon, ensure that any existing roaming profiles are upgraded before running the upgrade. See Upgrade roaming profiles

Warning:

You cannot upgrade to Dragon Medical Practice Edition 2 if your current license is for any of the non-medical versions of Dragon Medical. If you upgrade a computer from a previous version of Windows to Windows Vista or Windows 7, and that computer has Version 8.x, 9.x, or 10.x of Dragon installed, that version of Dragon will not work after upgrading to Windows Vista or Windows 7. All your Dragon voice profiles from Dragon version 10+ will remain intact and can be upgraded after you have installed Dragon NaturallySpeaking 13.

Note:

Version 10.x or above of Dragon can be upgraded to Dragon 13 or 15. Upgrading from Dragon version 9.x or earlier is not supported.

Note:

When upgrading, Dragon will automatically carry over the settings from the previous installation however, please still follow the steps in Configuration to ensure that your Dragon configuration settings match the recommended settings for Dragon to work correctly in Cris.

Tip:

Dragon software can be configured per individual user profile using the Typical installation. However, Wellbeing Software strongly recommend that the Custom installation is used as standard since this allows the Trust to configure required default settings for all users at once.

Next steps

Note:

You can also access Options via (right-click) Dragon menu > Tools > Options. Options set in this way will only apply to the open user profile.

Tip:

Before configuring roaming profiles, ensure that the shared volume where they will be stored is correct.

Important:

The installation and configuration process requires a local account with administration level rights (not the actual Local Administrator account, which should be disabled). It may be necessary to contact your PACS provider to install the Dragon software on PACS workstations if you do not have workstation administrator rights.