SpeechMike settings
Most reporting clinicians use Philips SpeechMike but you can use any microphone or headset to dictate in Cris.
Core Cris
Add a new microphone
Cris will list all connected devices it detects.
- Select Scribetech > Source.
- Select your preferred device.
Note:
You may use a headset, SpeechMike, or internal mic. If you charge your phone at a workstation it will be seen as an available mic.
Switch your microphone on / off
You can switch your mic on / off using either of the following methods if they are available to you:
Press (or release) the Record button on your SpeechMike
Click the microphone icon in the header
- Click mic
to switch the mic on. - Click mic
to switch the mic off.
When you have a report open, the New Cris
Switch your microphone on / off
You can switch your mic on / off using any of the following methods that are available to you:
Press the Record button on your SpeechMike
Click the microphone icon in the header
- Click mic
to switch the mic on. - Click mic
again to switch to standby (Voice commands can be used to activate the mic from standby). - Click mic
for a third time to switch the mic off.
Press the + key on your keyboard's number pad
Please see your system administrator if this is not configured.
Microphone status
When you open a report, the microphone is off by default. Its status in indicated in two ways:
- The mic icon in the top-right hand corner of the screen displays the mic state (on, off, asleep / standby).
- A mic icon appears next to the text editor, and the text box is highlighted, when the mic is switched on.
System Administration: Devices
Configure a document scanner.
Select location for scanned images.
Add a document scanner.
Devices:
|
| Printers |
|
| Document scanners |
|
| Bar code scanners |
|
| Microphone |
|
| Headset |
|
| Voice Recognition |
