Print settings

Configure letters, printing. Print settings in system tables should only be amended after consultation with Magentus. We recommend Letters training.

The tables System > Paper Setup, System > Printing and System > Print Setup should not be modified. Please contact your support provider for assistance.

System > Print Content Editor is used for Letters configuration and should only be modified by trained personnel.

  1. Select Tools > Devices > Printers Setup.

  2. Double-click or press F4 in one of the fields to see available printers.
  3. Double-click to select a printer.
  4. Select double-sided printing if this is supported by the printer.
  5. Click the Save as default button.

Tip:

Press the Esc key to exit a field without making a selection from an options list.

Cris uses standard Windows printing. Printers should be installed by your IT department.

Note:

If you require a scheduled stat printer, please contact us or your IT department. *This is not applicable to Consortium / Data Centre customers.

Magentus does not support local printers. Please contact your IT department.

System Administration: System settings

XR settings

Define an action - image location, worklist columns, insert auto report.

Formats

Reference field to configure MOTD, restrict ordering.

Print

Configure letters, printing. We recommend Letters training before amending these settings.

Normal tables

Define menus with more options - dose types, modalities, foetal presentation.

Limited tables

Define menus with finite options - alarm types, Yes / No fields.

Other system settings

Configure Licences for additional modules and Destinations for sending events or reports.